ASE B3 Auto Body Exam Prep Exam Questions & Answers 2026 (21–30)

Question 1

When preparing to repair a vehicle with Advanced Driver Assistance Systems (ADAS), a technician should:

TheoryPractice · Accepted Answer

Document existing calibration settings. Documenting the existing calibration settings before beginning repairs is essential to ensure proper restoration of ADAS systems after repair work is completed.

Question 2

After a vehicle has been in a collision, scanning for diagnostic trouble codes should be performed:

TheoryPractice · Accepted Answer

Both before and after repairs. Scanning for diagnostic trouble codes should be performed both before and after repairs to identify all issues and verify they've been resolved.

Question 3

When preparing to remove surface contaminants before body repair, which product should NOT be used on aluminum panels?

TheoryPractice · Accepted Answer

Steel wool. Steel wool should not be used on aluminum panels as it can cause galvanic corrosion when steel particles embed in the aluminum.

Question 4

Technician A says that undocumented previous repairs should be noted in the current repair documentation. Technician B says that verifying prior repairs is only necessary for warranty work. Who is right?

TheoryPractice · Accepted Answer

A only. Technician A is correct that undocumented previous repairs should always be noted in current repair documentation. Technician B is incorrect because verifying prior repairs is important for all repairs, not just warranty work.

Question 5

The most appropriate position for a vehicle on a frame rack during preparation for structural repairs is:

TheoryPractice · Accepted Answer

Raised to a comfortable working height. Raising the vehicle to a comfortable working height is the most appropriate position for preparation because it allows proper visibility and access to damaged areas while maintaining worker ergonomics.

Question 6

Before removing a damaged door, what should be done first?

TheoryPractice · Accepted Answer

Disconnect power and electrical connections. Before removing a damaged door, the power and electrical connections should be disconnected first to prevent damage to wiring and electrical components.

Question 7

When storing a removed bumper cover that will be reinstalled later, the technician should:

TheoryPractice · Accepted Answer

Place it in a clean area away from foot traffic. When storing a removed bumper cover for later reinstallation, it should be placed in a clean area away from foot traffic to prevent additional damage or contamination.

Question 8

Which of the following is the correct first step in preparing to repair a vehicle with collision damage?

TheoryPractice · Accepted Answer

Review the damage report and create a repair plan. Reviewing the damage report and creating a repair plan is the correct first step because it establishes what needs to be done before beginning any physical work.

Question 9

When a vehicle with ADAS (Advanced Driver Assistance Systems) needs repair, which system requires special attention during preparation?

TheoryPractice · Accepted Answer

Forward-facing camera system. The forward-facing camera system requires special attention during preparation because it often needs precise calibration after repairs to ensure proper operation of many ADAS functions.

Question 10

Technician A says that cleaning adhesive residue from a surface can be done with a plastic scraper. Technician B says that a metal scraper works best on all surfaces. Who is right?

TheoryPractice · Accepted Answer

A only. Technician A is correct because plastic scrapers safely remove adhesive without damaging surfaces. Technician B is incorrect because metal scrapers can damage painted surfaces and should not be used on all surfaces.

ASE B3 Auto Body Exam Prep Exam Questions & Answers 2026 (21–30)

More ASE B3 Auto Body Exam Prep practice questions

Free practice here. Timed mocks when you are ready.