AU Heavy Vehicle Knowledge Exam Questions & Answers 2026 (1–10)

Question 1

When approaching a STOP sign at an intersection, what must a heavy vehicle driver do before proceeding?

TheoryPractice · Accepted Answer

Come to a complete stop and give way to all vehicles and pedestrians on the intersecting road. Under the Australian Road Rules, a driver at a STOP sign must bring their vehicle to a complete stop and give way to all vehicles and pedestrians on the road they are entering, regardless of whether traffic is visible.

Question 2

What is the default speed limit for a heavy vehicle on an urban road where no speed limit sign is posted?

TheoryPractice · Accepted Answer

50 km/h. Under the Australian Road Rules, the default speed limit in a built-up area where no sign is posted is 50 km/h, and this applies equally to heavy vehicles unless a lower limit is specifically prescribed for heavy vehicles on that road.

Question 3

At a multi-lane roundabout, a heavy vehicle driver intending to turn right should position their vehicle in which lane on approach?

TheoryPractice · Accepted Answer

The right lane, or as close to the centre as the vehicle size permits. Under the Australian Road Rules, a driver turning right at a multi-lane roundabout must approach in the right lane (or as near to the right as practicable), though drivers of long vehicles may need to swing wide to safely navigate the roundabout geometry.

Question 4

A heavy vehicle approaches an uncontrolled T-intersection where the driver is on the road that ends (the top of the T). Who must give way?

TheoryPractice · Accepted Answer

The driver on the terminating road must give way to all vehicles on the continuing road. Under the Australian Road Rules, a driver on the terminating road of a T-intersection must give way to all vehicles travelling on the through road, regardless of vehicle weight or arrival order.

Question 5

A heavy vehicle driver approaches a railway level crossing that has flashing red lights and a boom gate beginning to lower. The driver should:

TheoryPractice · Accepted Answer

Stop before the stop line and wait until the lights stop flashing and the gate fully rises before proceeding. Under the Australian Road Rules, a driver must stop at the stop line when a level crossing has flashing red lights or a lowering boom gate, and must not proceed until the signals have ceased and any gate has fully risen, ensuring the crossing is completely clear.

Question 6

A 'no stopping' sign applies to a heavy vehicle driver. Which of the following actions is permitted in the no-stopping zone?

TheoryPractice · Accepted Answer

No stopping is permitted for any reason within a no-stopping zone. Under the Australian Road Rules, a no-stopping zone prohibits all vehicles from stopping for any reason or duration, and no exemption exists for brief passenger drops, deliveries, or activation of hazard lights.

Question 7

A heavy vehicle displaying a 'DO NOT OVERTAKE TURNING VEHICLE' sign is permitted to do which of the following when turning?

TheoryPractice · Accepted Answer

Occupy any part of the road, including oncoming lanes, necessary to complete the turn safely. Under the Australian Road Rules, a vehicle displaying a 'DO NOT OVERTAKE TURNING VEHICLE' sign is legally permitted to occupy any part of the road necessary — including the oncoming lane — to complete a turn, and other drivers must not overtake it while it is turning.

Question 8

A B-double travelling on an open highway sees a 'NO OVERTAKING TRUCKS' sign. This sign applies to vehicles with a gross vehicle mass above what threshold?

TheoryPractice · Accepted Answer

Over 4.5 tonnes GVM. In Australia, a 'NO OVERTAKING TRUCKS' sign prohibits overtaking by vehicles with a gross vehicle mass exceeding 4.5 tonnes, which encompasses all heavy vehicles including rigid trucks, semi-trailers, and combinations such as B-doubles.

Question 9

A heavy vehicle is travelling on a road and passes a sign showing a white truck silhouette on a blue background with a left-pointing arrow and the words 'TRUCK ROUTE'. This sign indicates:

TheoryPractice · Accepted Answer

A designated route for heavy vehicles is available to the left, which the driver may choose to use. A 'TRUCK ROUTE' directional sign indicates the location of a route that is designated and suitable for heavy vehicles; unless a corresponding 'no trucks' restriction prohibits through travel, following the truck route is the driver's choice, though it is strongly recommended for vehicle dimension and mass compliance.

Question 10

Which of the following is a recognised early warning sign that a driver should stop and rest immediately?

TheoryPractice · Accepted Answer

Frequent yawning, heavy eyelids and difficulty maintaining lane position. Frequent yawning, heavy eyelids and drifting within the lane are well-established early signs of fatigue; the driver must stop and take a rest break immediately.

AU Heavy Vehicle Knowledge Exam Questions & Answers 2026 (1–10)

More AU Heavy Vehicle Knowledge practice questions

Free practice here. Timed mocks when you are ready.