PVIS Test Prep practice questions and answers 2026. Tap an option to test yourself — you'll see the correct answer and a plain-English explanation for every question. Free, no login.
Q1What is the primary purpose of an Arc Flash Hazard Analysis for PV installations?
✓ Correct answer: D. To determine the appropriate PPE requirements for workers
An Arc Flash Hazard Analysis is conducted to determine the potential incident energy levels workers might be exposed to, which then informs the appropriate PPE requirements for electrically safe work practices. This is critical for preventing serious injuries during PV system installations.
Q2According to OSHA standards, at what height is fall protection required for workers installing rooftop PV systems?
✓ Correct answer: C. 6 feet or more
OSHA requires fall protection for construction workers at heights of 6 feet or more above a lower level. This includes PV installers working on rooftops, who must use appropriate fall arrest systems or other protective measures.
Q3Which of the following is the most appropriate safety measure when working with batteries in a PV system?
✓ Correct answer: B. Wear safety goggles and chemical-resistant gloves
Batteries contain corrosive chemicals that can cause chemical burns or eye damage. Safety goggles and chemical-resistant gloves provide essential protection when handling batteries to prevent these injuries.
Q4What should be included in a job hazard analysis (JHA) for a PV installation site?
✓ Correct answer: A. Identification of hazards, risk assessment, and control measures
A proper JHA should identify potential hazards, evaluate their risks, and determine appropriate control measures to mitigate those risks. This comprehensive approach ensures that safety protocols are tailored to the specific conditions of each installation site.
Q5When using a ladder to access a roof for PV installation, what is the proper placement angle?
✓ Correct answer: D. A 4:1 ratio (the base should be 1 foot out for every 4 feet of height)
The proper ladder angle follows the 4-to-1 rule: for every 4 feet of height, the base of the ladder should be 1 foot away from the wall or structure. This provides optimal stability and reduces the risk of the ladder tipping or sliding.
Q6What is the minimum approach distance for unqualified workers to exposed energized parts operating at 480 volts?
✓ Correct answer: C. 10 feet
OSHA requires unqualified workers to maintain at least 10 feet of distance from exposed energized parts operating at 480 volts. This distance helps prevent electrical shock or arc flash injuries to workers who lack the training to work safely with high-voltage equipment.
Q7Which of the following is the most effective method to control electrical hazards in PV installations?
✓ Correct answer: B. Implementing lockout/tagout procedures
Lockout/tagout procedures are the most effective way to control electrical hazards because they physically prevent the unexpected energization of electrical circuits during maintenance or installation work, protecting workers from electrical shock.
Q8What type of fire extinguisher should be readily available when working with electrical equipment in PV installations?
✓ Correct answer: A. Class C (electrical fires)
Class C fire extinguishers are specifically designed for electrical fires. They use non-conductive extinguishing agents that won't conduct electricity back to the user, making them safe and effective for electrical fires in PV systems.
Q9According to OSHA standards, what is required for a proper temporary guardrail system on a flat roof during PV installation?
✓ Correct answer: D. A top rail at 42 inches, a mid-rail, and capable of withstanding 200 pounds of force
OSHA standards require temporary guardrail systems to have a top rail at 42 inches, a mid-rail, and be capable of withstanding 200 pounds of force to prevent workers from falling off the roof edge during installation activities.
Q10What is the primary purpose of a safety data sheet (SDS) on a PV installation site?
✓ Correct answer: C. To provide information about hazardous chemicals and how to respond to exposures
Safety Data Sheets provide detailed information about hazardous chemicals, including their properties, health effects, safe handling procedures, emergency response protocols, and disposal methods, helping workers respond appropriately to chemical exposures or spills.
Use the free PVIS Test Prep sample, download the PDF, then unlock web-based timed mock exams for a full exam rehearsal.
Theory