Elevated Work Platform Ticket (Australia) Exam Questions & Answers 2026 (21–30)

Question 1

Before operating an EWP, you must conduct a pre-operational inspection. This inspection should be recorded:

TheoryPractice · Accepted Answer

In the machine logbook or pre-start checklist

Question 2

During a pre-start check, you notice a hydraulic fluid leak under the EWP. You should:

TheoryPractice · Accepted Answer

Tag the machine out of service and report it immediately

Question 3

Which of the following is NOT a typical item on an EWP pre-start checklist?

TheoryPractice · Accepted Answer

Operator's personal bank account details

Question 4

When should you perform a pre-operational inspection on an EWP?

TheoryPractice · Accepted Answer

Before each shift or before the machine is used for the first time that day

Question 5

During the function test of an EWP, the emergency stop button does not work. You should:

TheoryPractice · Accepted Answer

Take the machine out of service immediately and tag it

Question 6

The purpose of testing the platform controls from the ground before elevating is to:

TheoryPractice · Accepted Answer

Confirm all movements operate correctly and safely before personnel are at height

Question 7

You discover that the guardrail on the EWP platform is bent and the mid-rail is missing. You must:

TheoryPractice · Accepted Answer

Remove the machine from service until the guardrail is repaired

Question 8

An EWP's tilt alarm activates during the pre-start check on level ground. This indicates:

TheoryPractice · Accepted Answer

A possible fault in the tilt sensor or the machine is not on level ground

Question 9

When checking tyres on a rough terrain boom lift during pre-start, you should look for:

TheoryPractice · Accepted Answer

Correct inflation, cuts, bulges, and adequate tread depth

Question 10

The EWP logbook is important because it:

TheoryPractice · Accepted Answer

Provides a history of inspections, faults, repairs, and operator entries for safety and compliance