Forklift High Risk Work Licence (TLILIC0004) Exam Questions & Answers 2026 (11–20)

Question 1

At what lift height does forklift capacity generally begin to reduce significantly?

TheoryPractice · Accepted Answer

As the load is raised higher, especially above the free-lift zone. Raising a load shifts the centre of gravity upward and can reduce lateral stability and rated capacity, especially in high-reach situations.

Question 2

The forks are worn and thinner than the manufacturer's specification. This will likely:

TheoryPractice · Accepted Answer

Reduce the safe working load of the forklift. Worn forks lose structural strength and may not support the rated load; they must be inspected and replaced when worn beyond limits.

Question 3

Two forklifts are tandem-lifting a heavy load. Who decides the maximum permissible load?

TheoryPractice · Accepted Answer

The operator of the lower-capacity forklift determines the limit for the whole lift. In a tandem lift the weakest machine sets the safe limit, and the lift must be planned and supervised by a competent person.

Question 4

A forklift is rated at 3 t at a 600 mm load centre. The load to be lifted weighs 2.8 t with a 650 mm load centre. What should the operator do first?

TheoryPractice · Accepted Answer

Calculate or check if the actual capacity at 650 mm load centre still covers 2.8 t before lifting. The rated capacity decreases as load centre increases. The operator must verify the effective capacity at 650 mm before lifting.

Question 5

Which of the following best describes the purpose of the forklift counterweight?

TheoryPractice · Accepted Answer

To balance the weight of the load carried on the forks. The counterweight at the rear of the forklift offsets the load on the forks and keeps the machine stable.

Question 6

Fork length should be at least what proportion of the load's depth?

TheoryPractice · Accepted Answer

At least two-thirds of the load depth. Forks should support at least two-thirds of the load's depth to prevent the load from tipping forward off the fork tips.

Question 7

What information is NOT typically shown on a forklift data plate?

TheoryPractice · Accepted Answer

The operator's name. The data plate shows equipment specifications, not personnel information.

Question 8

A load is described as 2,500 kg but appears lighter than expected. What should the operator do?

TheoryPractice · Accepted Answer

Trust the documented weight; do not exceed the rated capacity. Always use documented load weights. Visual estimation is unreliable and potentially dangerous.

Question 9

Why is it important to centre the load on the forks side to side?

TheoryPractice · Accepted Answer

To prevent the forklift from tipping sideways. A load positioned to one side creates an uneven lateral load that can cause the forklift to tip sideways.

Question 10

If a load's weight is unknown, what is the correct action?

TheoryPractice · Accepted Answer

Determine the weight using documented records, scales, or consult the supplier before lifting. Unknown load weights must be established through reliable means before any lift is attempted.

Forklift High Risk Work Licence (TLILIC0004) Exam Questions & Answers 2026 (11–20)

More Forklift High Risk Work Licence (TLILIC0004) practice questions

Free practice here. Timed mocks when you are ready.